Japanese 
English
Chinese 
Korean 
Digital Strain Gauge Meter PSD-02A Series
Digital strain gauge meter PSD-02A is digital indicator designed for Pureron pressure sensor PC-302, 501 and 601 series. It is small size and lightweight 3-3/4 digit (3999) display equipped with two contact high-low limit comparative output as standard. Isolated circuit design between power and signal enables high noise resistance in case of multiple indicator drive with one power supply.
- Ultra small(24mm x 48mm) and lightweight (80g). Comparison setting by two contact high-low limit available
- High brightness 8mm height LED (red)
- Full display capability such as 3,000psi with 3-3/4 digit display
- Floating input isolated from power supply (DC 24V)
- High accuracy output detection by combination with Pureron pressure sensor PC-302/501/601 series
■General Specification
| Adaptation Sensor | Strain gauge type various transducers |
|---|---|
| Sensor Applied Voltage | DC 2.5V±1% 25mA or less |
| Zero Adjustment Range | ±4.0mV/V(front face) |
| Span Adjustment Range | Input range of 10 mV/V to 160 mV/V can be displayed in full scale(3000) by rear face multi rotation trimmer(rear face) |
| Accuracy | 0.1% F.S ±1 digit display 3001 or more is the output specification |
| Reference Voltage for Calibration | 10 mV/V(terminal of upper connector is switched) |
| Display | LED(light-emitting diode) number element, height of character 8mm(red) |
| Display Range | 0 to ±3999 |
| Sampling Speed | 2.5 times/second |
| Decimal Point | Can be set at arbitrary position by display part stud pin |
| Zero Point Drift | 0.02% F.S/℃ or less |
| Gain Drift | 0.02% rdg/℃ or less |
| External Hold | Negative signal or contact signal of 0V(short) |
| Operation Method | Double integral technique |
| Noise Rejection Ratio | NMR40dB, TYP(50/60Hz) |
| Operating Temperature & Humidity | 0 to 50℃/35 to 85％RH(no dew condensation) |
| Power Supply | DC19 to 29V, between power supply and COM, isolation |
| Power Consumption | Approximately 1W |
| External Dimensions | 48mm(W)×24mm(H)×87mm(D) |
| Weight | Approximately 80g |
| Accessory | Higher and lower connectors |
| Withstand Voltage | Between power supply terminal and COM DC500V, one minute |
| Insulation Resistance | Between power supply terminal and COM DC500V, 100MΩ or more |
■Analog Output
| Output Voltage | 1mV/digit(3V MAX) |
|---|---|
| Accuracy | 0.5%F.S (23℃±5℃) |
| Load Resistance | 5KΩ or more |
■Higher and Lower Limit Two-Stage Comparison (Analog Comparison)
| Comparison Setting Range | -1000 to 1500 for both of higher and lower limits, 0 to +3000(internal switching) |
|---|---|
| Setting Method | Switched by slide switch on front face. Set by multi rotation trimmer potention meter |
| Comparison Output | Relay output for both of Hi and Lo a contact, b contact, COM contact load capability / DC24V 1A AC120V 0.5A |
| Comparison Operation Condition | At Hi or Lo, red LED lights up |
| Comparison Condition | Hi: display value ≥ higher limit setting value, Lo: display value ≤ lower limit setting value Setting error ± 3 digit |
