Technology of PURERON is creative power

Low Pressure Loss / High Accuracy Filtration Ceramic Gas Filter PGFL Series

  • High Accuracy Filtration / Low Pressure Loss
    Low pressure loss is realized keeping high efficiency filtration of PGF series. Flow rate can be approximately doubled in the same dimensions as PGF series.
Filtration Accuracy 0.003μm(however, it is 0.1μm at purified water filtration)
Recommended Flow Rate20 to 400ℓ/min(refer to flow rate characteristic curve for each model)
Max. Operating Pressure17MPa (2,465PSIG) at20℃
Max. Allowable Differential Pressure9.6MPa (1,392PSIG) at20℃
Max. Continuous Operating Temperature120℃
Baking Temperature200℃
External Leakage2×10-11Pa・m3/sec or less
MaterialsHousing:SUS316L Roughness:Rmax0.7μm or less Element: Alumina ceramics (Al2O3) Seal: PTFE
Joint1/4”, 3/8”, 1/2”, 3/4” Gasket seal, Compression seal, and others

▲Back to Top

ModelA(mm)B(mm)C(mm)D(mm)E(mm)F(mm)
PGFL-2-02VR・PC0715.584.0Hex.241/4φ42.4130.0
PGFL-2-02SW・PC07 10.084.0Hex.241/4φ42.4 119.0
PGFL-2-03VR・PC07 19.0 92.0Hex.24 3/8φ42.4 146.0
PGFL-2-03SW・PC07 12.092.0Hex.243/8φ42.4 131.0
PGFL-3-02VR・PC0715.5 46.0Hex.241/4φ42.4 84.0
PGFL-3-02SW・PC07 10.0 46.0Hex.241/4φ42.4 73.0
PGFL-3-03VR・PC07 19.0 48.4Hex.243/8φ42.4 112.0
PGFL-4-02VR・PC0715.5 229.0Hex.241/4φ42.4 274.0
PGFL-4-03VR・PC0719.0 230.0Hex.243/8φ42.4 284.0

▲Back to Top

  • Filter baking: 200°C, 2 hours
  • Metal cap
  • For ultra large flow rate 500 to 3,000L/min, PGF-11 type is separately available.

▲Back to Top