Technology of PURERON is creative power

Digital Flow Meter DFM2 Series

This digital flow meter receives output pulse from digital flow switch or sensor and displays instantaneous flow rate of liquid.

  • Easy flow rate reading with 10 mm character height LED
  • Wide range from 0.2 to 120L/min applicable
  • Compact 72 x 72mm DIN size for front panel
  • Flow rate range setting by switch operation
ModelDFM2-1000
DisplayRed 7 segment LED 10 (height) x 5.5 (width) mm
Display Range0 to 99999 max. 5 digits displayed
Counting MethodPeriod measurement calculation method
Decimal Point0 to 4 digits after decimal point displayed, arbitrarily settable
Displayed Value Calibration MethodDisplayed Value Calibration Method
Display Flow Rate Range0.2 to 2,0.5 to 5,2.5 to 25,12 to 120(ℓ/min)
Auto Zero Time Setting1 to 9 seconds can be set by one second unit
Pulse Input
(INI)		 Input resistance: 10kΩ (pulled up to DC 24V) negative logic operation
Input current: 2mA or less
Operation voltage: ON voltage = 2V or less / OFF voltage = 5V or more
Pulse width: 50μs or more for both of H and L
Setting Prohibition Input
(KPT)		 Input resistance: 10kΩ (pulled up to DC 24V) negative logic operation
Input current: 2mA or less
Operation voltage: ON voltage = 2V or less (each setting value cannot be changed)
OFF voltage = 5V or more (each setting value can be changed)
Memory Setting Memory method: memorized by nonvolatile element (NV-RAM)
Memory time: approximately 10 years
AC Power Supply AC 100V / 200V,90 to 120％ 50／60Hz
DC Power Supply DC 24V ± 10% 80mA
Power Consumption Approximately 8.5VA
Operating Temperature -10 to 50℃(however, no freezing)
Operating Humidity 35 to 85％RH(however, no dew condensation)
Storage Temperature -25 to 85℃(however, no freezing)
Weight 450ｇ(accessory included)
Accessory Panel attachment bracket/screw
Adapted ModelAll digital flow switch models, digital flow sensor

*For setting change, refer to instruction manual included with product.

▲Back to Top